Telescoping Flagpoles
Compare our telescoping flagpole to anything on the market and you will find we have the finest quality, strongest, best looking telescoping flagpole available. Each Telescoping Flagpole is backed with a Limited Lifetime Warranty. Our flagpoles have NO Ropes, NO Chains, NO Pulleys so you don't have to worry about knots and tangles. Also, by not requiring a rope or pulley to raise the flag, it eliminates the clanging of the rope in the wind making our flagpoles virtually NOISE FREE. The flagpole is made of sturdy aircraft grade, 12 gauge (.080), 6005 T6 light weight aircraft aluminum. Our made in USA extruded aluminum is anodized with a hard coat finish making our flagpole virtually MAINTENANCE FREE. No need to worry about rust or painting.
Our Telescoping Flagpole has patented interlocking sleeves which allow you to easily raise each section of the flagpole without any troublesome push-buttons. Our interlocking sleeves interlock together inside each section so the flagpole will not collapse in the wind like many other twist-lock telescoping flagpoles. The interlocking sleeves are made of Lexan and held in place with a custom machined aluminum post fastener and 2 locking tabs so our interlocking sleeves will not come loose like other flagpoles that use glue. The interlocking sleeves also increase the bearing surface between each section to reduce wobble.
The swivel ring harness which the flags are mounted on, are made of Lexan and allow the flag to fly "Freely" 360 degrees around the pole, preventing the flag from wrapping around the flagpole. Less wear and tear on "Old Glory". It also comes with a double swivel ring which allows you to fly 2 flags or fly your flag at 1/2 staff.
Our 20' and 25' flagpole come with an amazing full 3" base diameter and a wall thickness of .080 which is 30% stronger than other telescoping flagpoles. We don't cut corners here at the base because this is where you need the strength.
Skeletal View of our Patented Interlocking Mechanism. (No More Ugly & Annoying Push Buttons!)
Don't be fooled by other telescoping flagpoles you see on the internet. Most are 16 gauge aluminum. Ours is either 13 gauge (15' and 18.5') and 12 gauge (20' and 25'). (The lower the number gauge the thicker the aluminum.) Only our pole uses a patented "lift and turn" interlock mechanism. Because of the inherent reliability of this design, we can offer the industry's only limited lifetime warranty... Because our pole will LAST A LIFETIME!
Most if not all other poles incorporate either a tension twist or push button, (or both) , to lock each section. These are failure points. Tension twist poles are often difficult to un-twist. Also, when a pole sways in the wind over the years, the push button, made of stainless steel, rubs against the aluminum until eventually the hole becomes elongated and the pole drops. That is why most pole warranties are 2, or 5 years, or maybe 10 years. They will all eventually fail.
AVAILABLE IN LIGHT BRONZE, TRADITIONAL SILVER, AND BLACK/BRONZE
Each pole ships with: made in USA telescoping flagpole, made in the USA premium nylon American flag, gold top ball, ground sleeve, three swivel harnesses - (for flying two flags, or one at half-staff), installation instructions, & warranty card.